Unlocking Efficiency and Security with High-Speed Stacking Doors – Your Guide to Industrial Access Solutions
High speed stacking doors are larger industrial doors, generally more than 6 meters long and wide. It has many functions such as heat preservation, cold preservation, insect protection, windproof, dustproof, sound insulation, fireproof, and odor prevention. High speed PVC stacking doors are used for large-area door openings and other internal and external doors in textile, food, refrigeration, electronics, printing, supermarkets, refrigeration assembly, precision machinery, logistics and warehousing and other places. It can meet the requirements of high-performance logistics and clean places, and has the advantages of saving energy. Improving air conditioning effect, high-speed automatic opening and closing, and improving operating efficiency.
High speed stacking door product advantages
Insulation and energy saving, the opening speed of High-speed fold-up door is 0.6-0.8m/s. The rapid opening and closing function improves the cooling and heating insulation effect in summer and winter, reduces energy loss and saves energy.
Good sealing performance. The bottom is equipped with an elastic PVC base cloth air seal. Which can be precisely combined with various uneven floors. The door frame is equipped with a sealing brush and a unique sealing system to block the movement of hot and cold wind. Effectively prevent mosquitoes, dust, odor, etc.
The high-speed fold-up door can be opened and closed about a thousand times a day and has a long service life.
Good wind resistance. The shape is a stacked folding fast door. The door curtain has multiple built-in or external lateral wind-resistant levers, so that the wind pressure can be evenly distributed over the entire door curtain, and it can withstand about ten levels of wind. Even large openings can protect workers and goods from interruptions.
It is easy to maintain. The door body is detachable and can be disassembled separately when maintenance is needed later, which is trouble-free and convenient.
High speed stacking door installation steps
Place the door frame and door cover of the high speed stack-up door on the ground, conduct preliminary measurements, trace points, and drill holes with an electric drill to prepare for the fixing work.
Install dustproof and windproof brushes on both sides of the door frame. They can be fixed with rivets, or you can use plastic steel buckles to install the brushes. It is simple and convenient.
Connect the wires to the motor and limiter, and fix the safety belt to the bearing.
Erect the door frame and door cover, and use an infrared level meter to measure whether the ground heights of the two door frames are consistent. If they are consistent, continue the fixing work.
Install the motor and limiter, and route all circuit lines down. Install through-beam infrared systems at the same height of the high speed stack-up door frames on both sides.
Use a toothless saw to cut the coil and lower it into the ground sense wire.
Connect the line, use motor drive to lift the curtain to the appropriate height and fix it, and adjust the upper and lower limits.
Install the upper door cover and motor cover of the high speed stack-up door.
High speed stacking door opening method
Geomagnetic induction type. When the locomotive enters the geomagnetic induction area (no induction to people), the stacking high speed door opens automatically.
Radar induction type. When a person/car enters the detection area (sensing moving objects), the stacking high speed door opens automatically.
Manual button type. When a person reaches the position of high speed PVC stacking doors and reaches out to press the up button, the door will open quickly.
Manual remote control type. When personnel enter the effective area (30 meters), press the door opening button on the remote control to control the high speed PVC stacking doors to open.
Manual pull-rope type, the pull-rope switch is preset in front of the door opening. After the person reaches the switch preset, pull the switch to open the high-speed fold-up door.
Password access control is used to prevent random entry and exit of the working environment. Entrants can enter based on employee cards, fingerprints, passwords, etc.
The above is an explanation of some product advantages, installation steps and opening methods of high speed PVC stacking doors. I hope everyone can have an in-depth understanding of high speed stack-up doors and choose the right industrial door.